Setup Video
-
How to Monitor and Manage Devices via Omada SDN Controller
This video will show you how to monitor and manage devices via Omada SDN Controller.
More Fold
-
How to Configure Schedules to Automate Network Control via Omada SDN Controller
This video shows how to configure WLAN Schedule, Port Schedule (PoE Schedule, Port Schedule), Upgrade Schedule, and Reboot Schedule to help you easily manage your network using the Omada Software Controller for demonstration.
More Fold
-
How to Monitor and Manage Clients via Omada SDN Controller
This video will show you how to monitor and manage clients via Omada SDN Controller.
More Fold
-
How to Check the Clients Signal Strength and Estimate the Actual Speed
This video will show you how to check the client signal strength and estimate actual network speeds.
More Fold
-
How to Create User Accounts on Omada SDN Controller
This video shows how to create custom roles, local user accounts and cloud user accounts of different levels on the Omada SDN Controller.
More Fold
-
How to Adopt Omada Devices via Omada Controller
This video will show you how to adopt Omada devices and configure a gateway network via the Omada SDN Controller (Omada Software Controller is used as an example).
More Fold
-
How to Install and Set Up Omada Software Controller
This video will show you how to install and set up the Omada Software Controller, using the Windows version for demonstration.
More Fold
Feature Filter: All Configuration GuideTroubleshootingUser Application RequirementFurther AssistanceWhen You Set Up
FAQs
- How to configure Optical Line Terminal (OLT) and Omada Switch with XM60A 07-01-20242399
- How to configure LAG (LACP) on Omada Switches via Omada Controller 06-27-202429966
- Troubleshooting 802.1X (Dot1X) Authentication Issues on TP-Link Omada Switches 06-17-20242601
- RADIUS Authentication Troubleshooting 06-17-20242526
- How To Fix VLAN Communication Issues Within Same VLAN on TP-Link Omada Switches 06-17-20242790
- What to do if Device Adoption Fails on my Omada Controller 06-17-20242896
- Omada Switch DHCP Relay Configuration Guide 06-03-20242795
- How to Configure IGMP Snooping on Omada Switches for Hotel IPTV Scenarios 05-13-20247091
- Best Practices for Preventing Network Loops with Omada SDN Solutions 03-22-202412399
- How to configure a TP-Link Switch as DHCP Server in Standalone mode 06-09-202360786
- Using the Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported) 06-08-202338447
- What to do if The Omada Controller Will Not Start in a Windows System (Controller 4.1.5 or above) 07-06-202382472
- Using the Omada SDN Controller to Manage Omada Devices Across Multiple Locations Via aController (5.0 and Above) 05-31-202341313
- How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI 04-26-202364449
- Using the Omada SDN Controller to Manage Omada Devices Across Multiple Locations Via a VPN Connection (Controller 5.0 and Above) 05-05-202330426
- What's the difference between the Master Administrator, Administrator and Viewer accounts in the Omada Controller? 04-12-202327230
- How to use the Ping tool in Omada APP 04-06-202330066
- What is 2FA and how to use it in Omada platform 04-04-202329324
- Typical CLI Configuration Examples for TP-Link JetStream Switch 12-13-202282692
- How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI 06-27-2022144891
- How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI 06-27-2022160391
- How to check and modify VLANs on a TP-Link JetStream switch via SNMP 06-24-202249398
- What should I do when the Omada Software Controller (V4) fails to discover the devices? 11-23-2021108481
- How to achieve AAA Authentication through TACACS + server on the switch 11-22-202149868
- How to setup Switch as DHCP server on Omada SDN Controller 08-12-2021109057
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
How to find the hardware version on a TP-Link device - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
More Fold
| SG2428P(UN)_V5.26_5.20.2 Build 20240115 | Download | |
|---|---|---|
| Published Date: 2024-03-08 | Language: English | File Size: 10.23 MB |
| Bug Fixed: Notes: | ||
| SG2428P(UN)_V5.26_5.20.0 Build 20230818 | Download | |
|---|---|---|
| Published Date: 2023-12-27 | Language: English | File Size: 11.17 MB |
| This firmware is fully adapted to Omada SDN Controller v5.9 and above. Notes: | ||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Linkproducts for direct download and further information, including a list of TP-Linksoftware that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode.To use Omada, please update your device's firmware to the latest version.
GPL Code
- SG2428P(UN)_V5.26_GPL
Emulators
Firmware Version | Working Mode | Language | |
|---|---|---|---|
20230818. | - | English | Browse |
Note:
1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.
2. The listed emulators might not have the latest firmware.
3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.
